Connect with us

Resources

How to Fix iPad unavailable on Lock screen? Top 3 Best Ways

logo startup info

Published

on

Turned on Ipad

Are you wondering to find ways how to restore unavailable iPad? And not sure why your iPad says iPad unavailable on the lock screen. Don’t worry; you are at the right place. We have the solution. No doubt, while using the iPad for different daily life tasks, seeing your iPad screen unavailable is  awful. However, this is a new security feature of iPadOS 15.2 to prevent unauthorizedusers from accessing your device. This is definitely for good. Your iPad will stop working after it receives the wrong passcodeseveral times, resulting in an error message of iPad Unavailable. However, this iPad unavailable message can even bother you sometimes on your iPad as well because of your few anonymous mistakes. And it can get very tricky to handle it. That’s why here we are today to guide how you can fix this error easily with zero to no hassle. But, before jumping into solutions, let’s look deeply into its most common causes so that you can resolve them accordingly.

Three Must-know Reasons Why the iPad Unavailable appears on the screen

Remember, you can never fix a problem without knowing its root cause. That’s why learning the root cause of the problem is important. So, what does iPad unavailable mean? And why your iPad is giving you this error. The following could be the mainreasons:

  1. Outdated Software: Outdated software may cause this problem, so you must keep your device’s software up to date.
  2. Swipe Button Issues: It may also happen if the swipe button doesn’t work after the iPad is locked for an extended time
  3. Incorrect Password Attempts: A lot of incorrect password attempts may also cause this problem.

 Top 3 Best Ways To Fix iPad Unavailable

Several methods are available on the internet; to answer your question about how to fix the iPad unavailable error, here are the top 3. Taking a closer look at each of them will help you in understand and fix the error in the best possible way.

Method1: How to Fix iPad Unavailable with iTunes

This solution is official and doesn’t require any third-party tools or services. You just need to follow the steps listed below, and the issue will be resolved:

  1. Depending on your preference, you’ll need a PC (installed with iTunes) or a Mac (installed (with iTunes or Finder).
  2. Put your iPad in recovery mode by turning it off. Connect your iPhone to your Computer by long pressing and holding the button on your iPad.
  3. Now, open iTunes and go to the Summary tab. There will be an option to restore. Your device will be restored as soon as you click it.

Sans titre 46

Method2: Try Out Tenorshare 4uKeyThe Fastest Method to Fix iPad Unavailable Error

Tenorshare 4uKey is a wonderful software that can be used to reset an iPad when it has been locked out. It’s an all-in-one solution for unlocking iPads, iPhones, and iPods. It works in every scenario, whether there is a problem with your device, a disabled Apple ID, or you have forgotten your passcode. With Tenorshare 4uKey, you can reset your iPad when locked out in the safest way. It also can remove the MDM login screen, screen-time passcode, and so on.

The most convenient thing about Tenorshare 4uKey is that you don’t need experience or expertise to use it. All you have to do is follow a few simple steps. Here are the steps you need to follow to eliminate the iPad unavailable problem.

Step 1: Navigate to Tenorshare’s website and download and install the 4uKey.

Step 2: On your screen, you’ll see some options. Default settings are selected for iPhone unlock mode. Select Start.

Sans titre 47

Step 3: Plug the iPad into your Computer. The device will be detected automatically by the software. Then click Next to continue.

Sans titre 48

Step 4: Reset your device by entering Recovery mode. The software will provide step-by-step instructions. Set your device’s recovery mode according to these instructions.

Step 5: The software detects the iPad’s firmware on its own. Click the Download button after selecting the location on your Computer. The firmware download will be initiated automatically.

Sans titre 49

Step 6: The last step is to click on Start to Remove. The resetting process will begin. Please wait a few minutes. You will see the unlocking message on the screen.

Sans titre 50

Your device is now ready for use.

Method3: How to fix iPad unavailable error without a computer

If you don’t have any computer available on the spot or don’t want to go through this process, you still have an option to unlock your iPad. There are a lot of different methods available, but the ones listed below one are the easiest ones that you can try out:

  1. Unlock iPad without Computer via iCloud (Password Needed)
  2. Unlock iPad without Computer by Previous Auto Erase Setup

You can go with any of these, but we recommend the most simple and efficient one, “Unlock iPad without Computer via iCloud.”

1. Unlock iPad without Computer via iCloud (Password Needed)

If you want to unlock your iPad without a Computer via iCloud, you can do it in the following way. However, it is important to have your password for this type of reset.

Step 1: From a friend’s device or another smartphone, visit the iCloud official website (www.iCloud.com).

Step 2: Sign in. (You will need your Apple ID and password to sign in.)

Step 3: Select “Find My iPhone.”

Step 4: Please select an iPad model from the list of “All devices.”

Step 5:  Click “Erase iPad” to confirm erasing the iPad data. Your iPad’s screen passcode and all data will be remotely erased.Upon completion, your iPad will be unlocked.

Sans titre 36

2. Unlock iPad Without Computer by Previous Auto Erase Setup

iPads can also be unlocked without a computer using Auto Erase. When you set up your passcode, you can turn on this option, and it works after you enter the wrong passcode 10 times. The only requirement for the Auto Erase method is that “Auto Erase” must be already enabled while setting the passcode. This is how  you can enable Auto Erase on your iPad after being locked out:

 

Step 1: Go to “Settings > Tap ID & Passcode”.

Step 2: Scroll down and click the Erase Data tab to enable “Auto Erase.”

 

Once you already have this type of setup, the only thing you need to do to unlock your iPad is to enter the wrong passcode 10 times. Your iPad’s data and password will be erased by the Auto Erase option. It will be like new when you restart your iPad.

Conclusion

Typically, you see the iPad unavailable message if you  enter the wrong password multiple times in a row. However, it can be solved through various methods if you are aware of the reason for this error. In today’s article, we have discussed what an iPad unavailable error means and how to restore an unavailable iPad. Now you have the different methods to try out, choose the best one according to your situation, and you are good to go.

Remember, Tenorshare 4uKey works best almost in every case, and it resets your iPad without asking for credentials. It makes fixing unavailable iPad easier and quicker. Explore more right here.

 

 

We are a team of writers passionate about innovation and entrepreneur lifestyle. We are devoted to providing you the best insight into innovation trends and startups.

Advertisement
Click to comment

Leave a Reply

Your email address will not be published.

Top of the month